The board for education and individual experiments with highquality text-LCD,
for self construction

myAVR Board MK2, assembly kit
• board for education and individual experiments with ATMEL microcontrollers (ATmega8 / 48 / 88 / 168 / 328)
• programming and communication with separate USB programmer “mySmartUSB MK2”,
  also useable for other target systems   -   all SMD components are equipped
• ATmega8 with preinstalled test programs
• typical in- and outputdevices (button, potentiometer, LED, buzzer, etc.)
• expansion connector for additional Add-Ons
• analog photosensor for experiments with different brightness value
• now with more functions!
  • ISP-interface onboard
  • highpos LED
  • infrared-interface for receiver and transmitter
• structured with didactically aspects

myAVR LCD Add-On, assembly
• LCD with 2 lines per 16 characters for text output
• with backlight
• with contrast control
• with connections for myAVR Boards and for following Add-Ons

Properties

myAVR Board MK2, assembly
• power supply with USB or extern
• programming with Assembler, C/C++ and BASCOM
• Crystal with 3.6864 MHz
• ATmega8 with
• 8 kByte Flash
• 512 Bytes EEPROM (100.000 write/read cycles)
• 1K Byte intern SRAM
• 2x 8 Bit Timer/Counter
• 1x 16 Bit Timer/Counter
• 6x analog-digital-converter channels
• Real Time Counter
• 23 digital in-/outputs
• ISP-interface
• infrared-interface

myAVR LCD Add-On, assembly
• high quality LC-Display (2 lines, 16 characters per lines)
• operating voltage: typical 4.8 - 5.3 V
• backlight
  • adjustable via software from controller
  • switchable via jumper
• LCD with contrast control
• Jumper for the setting of the R/W-signal

Scope of supply:

• myAVR Board MK2, assembly    [show / shut down]

  1 circuit board myAVR Board MK2 1 prozessor ATmega8 1 voltage regulator; µA 7806 1 rectifier; B80C800DIP 1 diode 1A 1N 4001 1 yellow LED 2 mA; LED 3MM 2MA GE 1 red LED 2 mA; LED 3MM 2MA RT 1 blue LED 2 mA; LED 3MM 2MA BL 2 green LEDs 2 mA; LED 3MM 2MA GN 2 capacitor 47 µF; ELKO RAD 47/25V 5 capacitor 100 nF; FOLIE MKS-2 100N 2 capacitor 22 pF; KERKO 22P 4 resistor 1,2 kΩ; METALL 1,20K 2 resistor 10 kΩ METALL 10K 1 resistor 160 Ω METALL 160R 1 photoconductive analoge; VT93N1

  1 inductor 10 µH; SMCC 0,10µ 1 crystal 3,6864 MHz;3,686411-HC49U-S 2 potentiometer; RT 10-L 47K 2 rod for potentiometer 2 miniature switch; TASTER 3301B 1 IC-socket; GS 28 3 pin header male SPL 20 1 piezo electric buzzer; SUMMER EPM121 1 connector; PSS 254/2G 1 PSK clutch empty case 2 PSK contacts 1 pin header female; BL 1X20W 2,54 2 pin header female; BL 1X10W 2,54 2 multi-pin connector; SL 1X10W 2,54 4 feet for the board 1 mySmartUSB MK2 (programmer and bridge)

  mySmartUSB MK2 (integrated on myAVR Board MK2) USB-programmer and interface programmer is supplied as a daughter platine with 2 female connectors on the myAVR Board MK2 all SMD-elements are fitted can also used seperate as AVR910 and 911 programmer, to programm other target systems Notice: The delivery includes no box header and ISP ConnectKit 10/6 pole!

• myAVR LCD Add-On, assembly    [show / shut down]

  1 circuit board myAVR LCD-Add-On 1 LCD-Modul with 2 lines to 16 characters and backlight 1 female connectors 20-pole 1 pin header 20-pole, angled 1 pin header 16-pole, straight 2 pin header 3-pole, straight 1 potentiometer (for contrast) 1 resistor 1,2 kΩ 1 resistor 10,5 kΩ 1 transistor (lightning control with PWM) BC547C 2 jumper 4 feeds for Board You can find more informations for myAVR LCD Add-On download area.